Yes, we do carry bed extenders.
I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 36-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers view full answer...
It's really going to depend on the camper and whether it was specifically designed for a long bed truck. Some are designed to work in either a short or a long bed, but if it's been designed as a long bed only the camper's center of gravity will likely end up behind the rear truck axle. This is inadvisable because this significantly reduces the amount of weight being applied to the front truck axle which will have negative effect on steering and braking response which would be a very dangerous... view full answer...
We do have a variety of options to help protect your kayak. These range from the foam blocks # MPG152 that you referenced to the linked page of crossbar pads like the Yakima part # Y07412 which are 20" long.
If you can let me know what load extender you are using I can make more of a specific recommendation. view full answer...
Yes, the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235 is exactly what you need in order to lock the Yakima Longarm Truck Bed Load Extender # Y01149. This will simply fit around the anti-rattle bolt that was included with your load extender. I attached a short demonstration video for you. view full answer...
From what you described you need to do, it sounds like you are needing an extension of 4' (48"). While I do have an option for you, there is not currently any extender alone compatible with your current hitch on your 2002 Dodge Ram 2500 that will allow for that much extension.
The longest extender we have compatible with your current hitch is the Curt Extender for 2" Hitch Receivers # C45796 which is 18" long, you would also cut your hitch weight capacity by 50% using this extender.
In... view full answer...
You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs # TLF2021 and # TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since these are available you'll be able to go ahead and order those extended running boards. For rear tie downs, you'll want to use the # TLF3008 or # TLF3008A (aluminum), which are also confirmed for your new truck.
If you also need turnbuckles for... view full answer...
Yes, you can purchase the mounting brackets so you can mount on another truck. It's # BX400. These are sold as a pair.
This bed extender # BX4004-01 is designed to fit tailgates between 48-64 inches wide view full answer...
The Longview Custom Towing Mirrors # LVT-1700 will extend far enough for your to see past the 8 foot bed.
The towing mirrors will slip over your vehicle's factory side-view mirrors to extend your line of sight. The mirrors are scratch-resistance will protect against wear and tear. The first surface plating will minimize distortion and glare.
The mirrors have a quick, slip-on installation with no tools needed. The mirrors have a durable ABS plastic housing that stands up to the elements.... view full answer...
In order to tow your Triton boat behind your 2017 Ram 1500 with the Lance 650 on board, you need a Class V hitch like the Curt # C15572 . Once you have the Class V hitch, you need an extender bar similar to the Hitch Extender # HE18 paired with an extended ball mount like the Hidden Hitch 13-1/4" Extended Ball Mount # BH20 in order to get the correct length clearance from the back of your camper.
You'll also want to consider adding a wiring extension like the Hopkins Coiled Adapter 7-Way... view full answer...
Yes, there is a ladder rack that is compatible with the Retrax Pro XR Tonneau Cover you have on your 2022 GMC Canyon Extended cab. This rack fits both the 5 foot and 6 foot bed of your Canyon. It is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500 lbs - 68" Crossbars item # Y01151-58. You will also need the Tonneau Cover Adapter Kit for Yakima OverHaul HD Truck Bed Ladder Racks item # Y01155. view full answer...
We have the Roadmaster Coiled Breakaway Cable, # RM-8603, that could be used in the bed of your truck to keep the cable from getting caught on items in the bed when towing your fifth-wheel or gooseneck trailer.
This cable can extend up to 8 feet in length to allow cornering and sharp turns with the trailer. view full answer...
For the Topline Bed X-Tender, # BX4004-01, for the 2003 Toyota Tacoma, you will not need any additional brackets or parts to install it on your truck. It attaches to the tailgate using included brackets and hardware. Take a look at the pictures below the description on the product page to see some close ups of the extender. view full answer...
For your 2015 Ford F-250 Short Bed, you will want to use TracRac Base Rails # TH21510.
Because these rails mount on the tops of your truck bed rails, you will want a tonneau cover that installs inside your bed rails. I recommend the Access Vanish Soft Roll-Up Tonneau Cover # 834532008454. This low profile cover installs and sit inside your bed rails, extending only 1/2 inch above the bed. view full answer...
It sounds like you're looking for TorkLift camper tie downs for your 2017 GMC Sierra 2500 Denali with a short bed. If you've got a factory hitch and no step or running board that extends under the bed of the truck, then the correct TorkLift tie downs are parts # TLC2220 (front), and # TLC3215 (rear). If you also need new turnbuckles, you can use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black # TLS9529-2-LK.
If you actually need to replace... view full answer...
Yes, The BedSlide Heavy-Duty Sliding Truck Bed Tray w/ T-Tracks # BE46ER is confirmed to fit your Ram 3500 MegaCab With Ram Boxes.
The sliding tray has a durable steel construction with a composite decking that is weather and rust resistant. The release lever secures tray in four positions fully closed, fully extended, and two locations in between. The tray has a weight capacity of 1,500 pounds.
I attached a review video link below. view full answer...
For your 2019 Ford F-250 it doesn't appear that there is a truck bed camper specific plug in or pigtail that was included, but I do have a solution that will work for you.
I recommend using the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157 since it's 10 feet long and will allow you to add the 7-way to your truck bed in a location suitable for your in bed camper- even if that is the cab side of the bed This harness will tee into the existing 7... view full answer...
Using most extenders will typically lower the tongue weight and towing capacity of the hitch by up to 50 percent, unless you're planning on using something like the Torklift Super Truss # TLE1542 you mentioned. This extender provides 42 inches of extension, but must be used with a Torklift Super Hitch that has two receiver openings. This is a pretty specialized hitch that's typically available for 3/4 and 1 ton trucks.
If your truck has a 2-1/2 inch receiver hitch on it, The Reese Hitch... view full answer...
The best offset option available for your Toyota Tundra and your gooseneck trailer is the Draw-Tite Gooseneck Hitch Ball with 5 Inch Offset, # 19308, that you referenced. Gooseneck hitches were not designed to provide additional offset for gooseneck trailers and short bed trucks, but this offset ball will improve your turning clearance by approximately 10 degrees.
As you may have already determined, this ball will not allow you to safely make a 90 degree turn, but it will allow the best... view full answer...
To ensure that you actually need a 36 inch extender, and not something a little longer or shorter, TorkLift recommends taking the following measurement:
If the camper is mounted on the truck, Measure from the face of the truck's rear bumper to the outside edge of the camper's bumper. This is the length of the extension that you need.
If the camper is not mounted on the truck:
1. Measure from the inside of the front of your truck bed to the outside face of the truck's rear bumper.
2.... view full answer...
I recommend adding the following TorkLift Tie-Downs to your 2012 Chevy Silverado 3500 long bed dually:
- Front # TLC4204
- Rear # TLC3212
These are designed to fit if your truck has a factory trailer hitch so you'll want to confirm that prior to purchasing.
To complete your tie-down setup I also recommend picking up turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020. These are easier to use than chains and provide a fast and easy way to help keep your truck camper... view full answer...
Go To Results